Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Slow connection when using PIX 501. Reboot fixes temporarily.

Status
Not open for further replies.

dcusher

Technical User
Feb 23, 2012
1
0
0
US
I think this issue is being caused by something with my config. I am having to reboot the PIX once or twice a day to get bearable speeds. I have connected to the modem directly and have had a consistently good connection. The PIX will give me a decent speed for 4-5 hours before dropping down below 1 mbps.

Sorry if this question has been asked before. I found some similar threads on the forums but had no results.

I am using comcast cable as my ISP. This is a residential connection.

Here is my config:


PIX Version 6.3(5)
interface ethernet0 100full
interface ethernet1 100full
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password
passwd
hostname Sample-PIX
domain-name sample.lan
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol pptp 1723
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
access-list 200 deny icmp any any
pager lines 24
icmp deny any echo outside
mtu outside 1500
mtu inside 1500
ip address outside dhcp setroute
ip address inside 10.22.0.1 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
static (inside,outside) tcp interface pptp 10.22.0.5 pptp netmask 255.255.255.255 0 0
static (inside,outside) tcp interface 4444 10.22.0.5 4444 netmask 255.255.255.255 0 0
access-group 200 in interface outside
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout sip-disconnect 0:02:00 sip-invite 0:03:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server TACACS+ max-failed-attempts 3
aaa-server TACACS+ deadtime 10
aaa-server RADIUS protocol radius
aaa-server RADIUS max-failed-attempts 3
aaa-server RADIUS deadtime 10
aaa-server LOCAL protocol local
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
telnet 10.22.0.0 255.255.255.0 inside
telnet timeout 5
ssh 0.0.0.0 0.0.0.0 outside
ssh timeout 5
console timeout 0
dhcpd address 10.22.0.50-10.22.0.81 inside
dhcpd dns 4.2.2.2 8.8.8.8
dhcpd lease 60800
dhcpd ping_timeout 750
dhcpd option 66 ascii tftp.comnexia.com
dhcpd enable inside
terminal width 80
Cryptochecksum:1b6f3babbbe2b326400cf9e748623e24
: end

I'm fairly new to this, but technically capable of troubleshooting. Thanks for any help you guys can give.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top