Slooooow Link

[djacobus]

I have a 384k frame relay connection that is extremely slow. When the router is reset the line seems ok but after an hour or two it slows to a crawl. This is a 2600 router with an internal WIC. Here is the config on the router:

Building configuration...

Current configuration : 1572 bytes
!
version 12.2
service timestamps debug datetime msec localtime
service timestamps log datetime msec localtime
service password-encryption
!
hostname 12-2620
!
logging buffered 4096 debugging
no logging console
enable password 7 0507130223495C584B56
!
username ElMonteFalcon password 7 082D59430B1C17464058
clock timezone CST -6
clock summer-time CDT recurring
ip subnet-zero
!
!
no ip domain-lookup
!
!
!
!
interface Loopback0
ip address 192.168.0.13 255.255.255.252
!
interface FastEthernet0/0
ip address 192.168.9.3 255.255.255.0
speed auto
full-duplex
!
interface Serial0/0
ip address 192.168.254.246 255.255.255.252
encapsulation frame-relay
no ip mroute-cache
no fair-queue
service-module t1 timeslots 1-6
service-module t1 remote-alarm-enable
frame-relay traffic-shaping
frame-relay lmi-type ansi
!
ip classless
no ip http server
ip pim bidir-enable
!
!
map-class frame-relay 384k
no frame-relay adaptive-shaping
!
line con 0
exec-timeout 0 0
password 7 XXXXXXXXX
login
line aux 0
line vty 0 4
password 7 XXXXXXXXX
login
!
end

 

[jrzardo]

Hi Djacbous,
His this configuration complete? I'm not finding FR dlci on ser0/0 or another sub-interface like ser0/0.1.
Can you post the config of the router on the other side of the link?
In this config, I can see you have "frame-relay traffic-shapping" applied to ser0/0 but no map-class and these probably are "shapping" your traffic in 56kb/s. Try to remove these command in both sides of the link and do a test.
If you yype "show frame-relay pvc" and you will see a pvc number/list, than type again "show frame-relay pvc xx" and you can see if you are shaped and how of the traffic was delayed/discarded by the shaper.
[]'s
Jeff