SLIPD

[CKDANG007]

Hello,

I've been getting SLIPD on all 4 loops:

(1x) VZB LD T1 loop 1
(1x) ATT local T1 loop 2
(1x) VZB Local and LD loop 7 PRI with primary DCH
(1x) VZB Local and LD loop 8 PRI with backup BCH

clocking locked to primary, slot 7.

I opened ticket on loops 7 and 8 and VZB says to verify the timing source and that it's the PBX causing the SLIPD erors. I am getting DTA015. Help anyone? Below is the stat and lcnt I just did:

DTA015 7


DTI000
.stat

DTI TRK LOOP 1 - ENBL
FFMT/LCMT/YALMT: ESF/B8Z/FDL
SERVICE RESTORE: YES
YEL ALM PROCESS: YES
ALARM STATUS : NO ALARM
CH 01 - IDLE DID VOD CH 02 - IDLE DID VOD
CH 03 - IDLE DID VOD CH 04 - IDLE DID VOD
CH 05 - IDLE DID VOD CH 06 - IDLE DID VOD
CH 07 - IDLE DID VOD CH 08 - IDLE DID VOD
CH 09 - IDLE DID VOD CH 10 - IDLE DID VOD
CH 11 - IDLE DID VOD CH 12 - IDLE DID VOD
CH 13 - IDLE DID VOD CH 14 - IDLE DID VOD
CH 15 - IDLE DID VOD CH 16 - IDLE DID VOD
CH 17 - IDLE DID VOD CH 18 - IDLE DID VOD
CH 19 - IDLE DID VOD CH 20 - IDLE DID VOD
CH 21 - IDLE DID VOD CH 22 - IDLE DID VOD
CH 23 - IDLE DID VOD CH 24 - IDLE DID VOD

DTI TRK LOOP 2 - ENBL
FFMT/LCMT/YALMT: ESF/B8Z/FDL
SERVICE RESTORE: YES
YEL ALM PROCESS: YES
ALARM STATUS : NO ALARM
CH 01 - IDLE DID VOD CH 02 - BUSY DID VOD
CH 03 - IDLE DID VOD CH 04 - BUSY DID VOD
CH 05 - BUSY DID VOD CH 06 - IDLE DID VOD
CH 07 - IDLE DID VOD CH 08 - IDLE DID VOD
CH 09 - IDLE DID VOD CH 10 - IDLE DID VOD
CH 11 - IDLE DID VOD CH 12 - IDLE DID VOD
CH 13 - IDLE DID VOD CH 14 - IDLE DID VOD
CH 15 - IDLE DID VOD CH 16 - IDLE DID VOD
CH 17 - IDLE DID VOD CH 18 - IDLE DID VOD
CH 19 - IDLE DID VOD CH 20 - IDLE DID VOD
CH 21 - IDLE DID VOD CH 22 - IDLE DID VOD
CH 23 - IDLE DID VOD CH 24 - BUSY DID VOD

PRI* TRK LOOP 7 - ENBL
FFMT/LCMT/YALMT: ESF/B8Z/FDL
TRACKING
SERVICE RESTORE: YES
YEL ALM PROCESS: YES
ALARM STATUS : NO ALARM
CH 01 - IDLE DID 3VCE * CH 02 - IDLE DID 3VCE *
CH 03 - IDLE DID 3VCE * CH 04 - IDLE DID 3VCE *
CH 05 - IDLE DID 3VCE * CH 06 - IDLE DID 3VCE *
CH 07 - IDLE DID 3VCE * CH 08 - IDLE DID 3VCE *
CH 09 - IDLE DID 3VCE * CH 10 - IDLE DID 3VCE *
CH 11 - IDLE DID 3VCE * CH 12 - IDLE DID 3VCE *
CH 13 - IDLE DID 3VCE * CH 14 - IDLE DID 3VCE *
CH 15 - IDLE DID 3VCE * CH 16 - IDLE DID 3VCE *
CH 17 - IDLE DID 3VCE * CH 18 - IDLE DID 3VCE *
CH 19 - IDLE DID 3VCE * CH 20 - IDLE DID 3VCE *
CH 21 - IDLE DID 3VCE * CH 22 - IDLE DID 3VCE *
CH 23 - IDLE DID 3VCE * CH 24 - DCH 7

PRI* TRK LOOP 8 - ENBL
FFMT/LCMT/YALMT: ESF/B8Z/FDL
SERVICE RESTORE: YES
YEL ALM PROCESS: YES
ALARM STATUS : NO ALARM
CH 01 - IDLE DID 3VCE * CH 02 - IDLE DID 3VCE *
CH 03 - IDLE DID 3VCE * CH 04 - IDLE DID 3VCE *
CH 05 - IDLE DID 3VCE * CH 06 - IDLE DID 3VCE *
CH 07 - IDLE DID 3VCE * CH 08 - IDLE DID 3VCE *
CH 09 - IDLE DID 3VCE * CH 10 - IDLE DID 3VCE *
CH 11 - IDLE DID 3VCE * CH 12 - IDLE DID 3VCE *
CH 13 - IDLE DID 3VCE * CH 14 - IDLE DID 3VCE *
CH 15 - IDLE DID 3VCE * CH 16 - IDLE DID 3VCE *
CH 17 - IDLE DID 3VCE * CH 18 - IDLE DID 3VCE *
CH 19 - IDLE DID 3VCE * CH 20 - IDLE DID 3VCE *
CH 21 - IDLE DID 3VCE * CH 22 - IDLE DID 3VCE *
CH 23 - IDLE DID 3VCE * CH 24 - BKUP DCH 8

.lcnt

DTI TRK LOOP 1
TRSH CNT:
BPV -000
SLIPD -004
SLIPR -000
CRC -000
LOSFA -000
OS_BPV -000
OS_LOSFA-000
OS_YEL -000


DTI TRK LOOP 2
TRSH CNT:
BPV -000
SLIPD -005
SLIPR -000
CRC -000
LOSFA -000
OS_BPV -000
OS_LOSFA-000
OS_YEL -000


PRI TRK LOOP 7
TRSH CNT:
BPV -000
SLIPD -005
SLIPR -000
CRC -000
LOSFA -000
OS_BPV -000
OS_LOSFA-000
OS_YEL -000


PRI TRK LOOP 8
TRSH CNT:
BPV -000
SLIPD -005
SLIPR -000
CRC -000
LOSFA -000
OS_BPV -000
OS_LOSFA-000
OS_YEL -000


.

 

[Firebird Scrambler]

It might be worth checking the clocking in LD 60. i.e. ssck 0 etc. Although you have stated it's Loop 7, it's also obtaining the settings in LD 73 etc.

All the best

Firebird Scrambler
Meridian Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[bhassell2000]

See where the clock is tracking

in LD 73

Prt
ddb

in LD 60

ssck 0
ssck 1

Thanks,

Buddy

 

[janaya]

Open a ticket with ATT. I would bet they own the last mile and Verizon rides their lines into your location.

Disable the cards and associated tmdi.

ld 48

.slft tmdi X (whatever loop)

Re-enable the cards with an FDL.

But, I bet this is a carrier issue..

 

[CKDANG007]

THANKS GUYS!

REQ PRT
TYPE DDB

CC0 7
PREF CC0 7
SREF CC0 8
CTRR NO

TRSH 00
RALM 3
BIPC 2
LFAC 3
BIPV 3 2
SRTK 5 30
SRNT 15 3
LFAL 17 511
SRIM 1
SRMM 2
ICS


REQ ****

OVL000
>*LD 60
DTI000
.SSCK 1
DSBL
IP DB PORT 2 DSBL
MEDIA GATEWAY CLK SRC: CC
.SSCK 0
ENBL
CLOCK ACTIVE
CLOCK CONTROLLER - LOCKED TO SLOT 7
PREF - 7
SREF - 8
AUTO SWREF CLK - ENBL
NO ERROR

IP DB PORT 1 DSBL
IP DB PORT 2 DSBL
IP DB PORT 3 DSBL
IP DB PORT 4 DSBL
CALL SERVER CLK SRC: CC
.
****
SO LAST THURSDAY ATT CAME OUT TO PROVE THE DMARK. DMARK PROVED CLEAN ON BOTH VZB CIRCUITS LOOP 7 AND 8. ON FRIDAY THE PBX TECH FOUND 2 CLOCKING SOURCES AND PHYSICALLY REMOVED THE CLOCK CONTROLLER OFF OF THE CARD ON LOOP 1 AND LEFT THE CLOCK CONTROLLER ON LOOP 7. EVERYTHING RAN CLEAN OVER THE WEEKEND. I CHANGED THE RLI'S TO RE-ROUTE TRAFFIC BACK OVER THE VZB LOOP 7 AND 8 AND BY MONDAY NIGHT THERE WERE TONS OF SLIPD'S ON ALL THE LOOPS 1, 2, 7 AND 8. WE'RE WAITING FOR THE TMDI CARD FROM OUR PBX VENDOR TO REPLACE LOOP 7. VZB CLOSED OUT THEIR TICKET. IF THE LOOP 7 TMDI CARD REPLACEMENT SCHEDULED FOR NEXT WEEK DOES NOT CLEAR THE ERRORS THEN I'M NOT SURE WHAT THE NEXT STEP IS.

 

[nhphoneguy]

If the TMDI card is going to be delayed, you could try taking the clock controller you took from Loop 1 and swapping with the one on loop 7.
Also - what type of cabinet is this? NTP states that in the NTAK11Dx and NTAK11Fx, the active clock can only be in slots 1-3.