I have installed a slave drive, and now I have 2 extra drive letters D: and E:, but the E: drive is also a system_ save. Please explain to me what this is!! I would also like to know if i can install windows 98 on the slave so as to use it in another computer. Thank-you
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations biv343 on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Slave Drive Help Please 1
- Thread starter mbfleece
- Start date
-
1
- #2
If you have two extra drive letters after installing another drive, then this drive must have two partitions setup on it.
You can setup Windows 98 on this drive, but if you want to put into another computer why not put it that computer first then set it up. It would be far easier, because the drivers that would be installed could all be different.
If you want to set up the slave to have Windows 98 on it, so that you can dual boot your system have a look at my website for information on doing this.
You can setup Windows 98 on this drive, but if you want to put into another computer why not put it that computer first then set it up. It would be far easier, because the drivers that would be installed could all be different.
If you want to set up the slave to have Windows 98 on it, so that you can dual boot your system have a look at my website for information on doing this.
- Status
Similar threads
- Locked
- Question