Can anyone explain how to get a Virtual extension and single line extension port to ring at the same time when the virtual extension number is dialed. The client wants full time auto attendant then the dial action table digit 0 to ring a VE and ring over the page speakers at the same time. Idea is to connect the SLT extension to the Bod=gen Page Amp ring input.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
SL2100
- Thread starter phones001
- Start date
OzzieGeorge
Programmer
Make the virtual the pilot of a department group and put the extensions in the department group.
belevedere
Instructor
Try the call forward both ring option.
MB 24-09
MB 24-09
- Thread starter
- #4
Thanks for the answers and I will set up on my bench system this week to test.
Just a follow up to make sure it will route correctly.
From the DAT table callers selects 0 which is set to transfer to a VE 250. If we use call forward both ring to the analog x181 which is connected to the page amp ring input, if there is now answer on either the call will route to the box for 250? We are using the box 250 as a general delivery mailbox.
Just a follow up to make sure it will route correctly.
From the DAT table callers selects 0 which is set to transfer to a VE 250. If we use call forward both ring to the analog x181 which is connected to the page amp ring input, if there is now answer on either the call will route to the box for 250? We are using the box 250 as a general delivery mailbox.
- Status