Jeff Lephew
IS-IT--Management
Anyone have any ideas for connecting asterisk based SIP trunks to the SL2100?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
SL2100 with Asterisk SIP Trunks
- Thread starter Jeff Lephew
- Start date
- Status
OzzieGeorge
Programmer
Just did a SV9100 to 3CX and I would suggest that it depends on how integrated you want them to be. In OZ we have sip modification scripts that change the way the sip is set up in commands that you can't alter in any normal way and I don't know if you have those in the US. I will check the command number tomorrow at work. Basically we used an ad hoc sip trunk that doesn't register (no password or username) and you may have to play around with the carrier type setting.
quazimotto
Programmer
Jeff,
Did you get the config working? I have it working on SV8100_Asterisk.
Quaz
Did you get the config working? I have it working on SV8100_Asterisk.
Quaz
- Status
