SL1000 hunting incoming ringing when Operator busy or no answer

[snoppert]

Would l ask for programming about set trunk incoming ring to operator and hunting to another extension when operator busy or no answer.

Thanks for your help and sorry for my poor english.

 

[belevedere]

Usually these are set up to ring phones/trunks in a ring group, then overflow to an auto Attn. However, you can place 1 phone (OPR) in the ring group then overflow to another ring group with the other phone in it.
22-02 = normal
22-05 = tks in rg gp 1
22-04 = ring group 1 = OPR ext
22-08 = overflow to ring gp 2
22-04 = ring group 2 = other extension

NOTE: mode 1 is usually the day mode.