Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Sl1000 debug terminal 1
- Thread starter roldix27
- Start date
-
1
- #2
belevedere
Instructor
I'm not sure why you need this access since it is usually directed and interpreted by NEC NTAC. However the system is no longer supported, so try this..
MB 90-31-01 set to 1 = enable. May need a system reset.
The default username is sl1000, and password is 12345678.
See p 3-2 of attached document.
MB 90-31-01 set to 1 = enable. May need a system reset.
The default username is sl1000, and password is 12345678.
See p 3-2 of attached document.
- Status
