Hello CS1000
We have a problem signalling to a Option-51 from a BCM50.
I have a customer with an Option-51 running rel.22.
Their BCM50 is connecting to the '51 via SL1.
They have installed the Q.Sig and MCDN licences.
The trunks signal to each other, the '51 can call the BCM.
When the BCM calls the '51 it receives "Bearer Cap" (BC) errors.
The SL1 protocol on the BCM is configured to the Option Engineer's satisfaction.
The Option-51 is, I assume configured correctly.
Is any one aware of confirmed issues regarding SL1 and BCMs?
If there are issues, are they resolvable?
I have seen posts suggesting the pre-rel.24 Options couldn't signal correctly with BCMs, that was on the BCM forum, but thought I'd check with the Option forum.
Help!
We have a problem signalling to a Option-51 from a BCM50.
I have a customer with an Option-51 running rel.22.
Their BCM50 is connecting to the '51 via SL1.
They have installed the Q.Sig and MCDN licences.
The trunks signal to each other, the '51 can call the BCM.
When the BCM calls the '51 it receives "Bearer Cap" (BC) errors.
The SL1 protocol on the BCM is configured to the Option Engineer's satisfaction.
The Option-51 is, I assume configured correctly.
Is any one aware of confirmed issues regarding SL1 and BCMs?
If there are issues, are they resolvable?
I have seen posts suggesting the pre-rel.24 Options couldn't signal correctly with BCMs, that was on the BCM forum, but thought I'd check with the Option forum.
Help!