SL-100 T-1 to channel bank (2W-FXS/GT) cards

[WIREDAWG]

Does anyone know the programing for this situation? The T-1 needs to run from the SL-100 switch to the channel bank filled with 2W/FXS cards. I have been able to place a call with this configuration however when the distant end picks up the connection drops. (distant end being the SL-100).
any help would be greatly appreciated.

 

[PERRYPJ]

DON'T KNOW MUCH ABOUT SL-100 BUT IF THE ONLY THING THAT WILL WORK IS A LINE SIDE T1 INTERFACE CARD IN A OPTION 11-81C. THIS ALLOWS YOU TO PROGRAM THE SWITCH FOR FXO, EITHER GRD START OR LOOP START

OLD ROLMEN WORKING ON NORTELS