Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Skip if Busy

Status
Not open for further replies.

venkatpavan

Programmer
Feb 18, 2006
42
SG
Hi,

There is an option Skip if Busy for Timeevent,Do we have anything for Source event also.

Data is transfered from server1 to server2,My map is looking at Server2 for that data as source event,The file is big so it is taking time to transfer to the server.But as my map has Source event it is picking up the file as it sees the file instead of waiting for the transfer to complete.

Do we have any settings that will make my map to wait until tha transfer is complete.I tried by using Timeevent also but still the issue is same.

Thanks.....
 
There are no settings that can solve this problem. You need to either transfer the file and rename it at the end of the transfer to the trigger file name - you can do this with ftp - or you can send an empty file with a different name at the end of the transfer and use this as the trigger file.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top