Site2Site and Remote Client VPN.

[RothkoConsulting]

Hello All,

Is it possible for a Site2Site and Remote Client VPN to co-exist on the same PIX? It might just be my config skills, but my Remote Client access has now stopped.

Can anyone shed any light on this?

Thanks,

Phil.

 

[NetworkGhost]

Yes it is. Remember you can only have 1 crypto map per interface so you will have to have noth your clinet crypto map and site to site in the same map.

 

[Dublin73]

Hi Phil, I had the same problem. Got some good help from people on this site and by using Cisco's example...

http://www.cisco.com/warp/public/110/pixpixvpn.html

Here's my post...

http://www.tek-tips.com/viewthread.cfm?qid=1154088&page=1

If you scroll directly to the last post you'll see the configs. of our 2 PIXes

good luck!