praks25
MIS
- Sep 5, 2003
- 13
Hello,
I have a PIX 520 Version 6.3 running 5 site-to-site's, 4 with corresponding PIX's and 1 with a nortel contivity.
all site-to-site tunnels are up and functional.
I recently configured my PIX for aaa authentication using RADIUS authentication for VPN clients.
after configuring the above, the 1 site-to-site tunnel with the nortel seems to go down.
when doing a 'show crypto isakmp sa'
the state for the nortel site-to-site reads 'OAK_CONF_XAUTH'
If I remove the statement
'crypto map mymap client authentication XXXXXX'
from the crypto statements it brings down aaa authentication but my site-to-site tunnel with nortel comes back up.
Please let me know if there is anything additional that i need to configure to run both aaa authentication and the site-to-site tunnel with nortel
Thanks
praks25
I have a PIX 520 Version 6.3 running 5 site-to-site's, 4 with corresponding PIX's and 1 with a nortel contivity.
all site-to-site tunnels are up and functional.
I recently configured my PIX for aaa authentication using RADIUS authentication for VPN clients.
after configuring the above, the 1 site-to-site tunnel with the nortel seems to go down.
when doing a 'show crypto isakmp sa'
the state for the nortel site-to-site reads 'OAK_CONF_XAUTH'
If I remove the statement
'crypto map mymap client authentication XXXXXX'
from the crypto statements it brings down aaa authentication but my site-to-site tunnel with nortel comes back up.
Please let me know if there is anything additional that i need to configure to run both aaa authentication and the site-to-site tunnel with nortel
Thanks
praks25