SIP URI Crash PBX

[szpuni]

Hi all,
I found a problem with the Avaya IPO 500.
I need to have to SIP Trunks in the system, one will be used as main one and second as a backup.
The problem is showing up when I add on more that 20 SIP URI to second SIP trunk.
In first one I have 37 working SIP URI, and since I add on the second one with more than 20 the PBX is crashing and I have to bring it back to Factory settings by DTE cable. Less than 20 and PBX is running.
Is there any restrictions on how many SIP URI I can use?

Any body seen something like this?
I`m using firmware 4.1.1201

 

[janni78]

Sounds like you should report that to Avaya or BP.
Never had the need for more than 3 URIs so wouldn't know.

Why do you need 37 by the way? =)

 

[szpuni]

This is a bit complicated

Actually we need about 70 to make it run in the way we want to.

 

[l33byt1980]

I looked on the email I get from Tier 4 with trail build testing. There is a Cq for this and is fixed in the up coming Maint release due around 20th June ish.


ACA - IPOffice implement
ACA - IP Telephony
CCNA - Passed at last

 

[TheDoz]

I'm confused, are we talking 2 SIP trunks? The first sip trunk has 37 channels (DID numbers)in the URI tab?
And the second SIP trunk has 20 channels (DID numbers)in the URI tab? And if you add 1 more DID number (channel) it crashes the IP office?
Just currious.

"The lack of money is the root of all evil"