Sep 21, 2008 #1 MitelAU Technical User May 5, 2008 159 AU Hi All, Has anyone successfully connected a Mitel 3300 ver 8 to Cisco Call Manager 4.2 via SIP trunks. Knowledge is power, thats why we share!
Hi All, Has anyone successfully connected a Mitel 3300 ver 8 to Cisco Call Manager 4.2 via SIP trunks. Knowledge is power, thats why we share!
Sep 22, 2008 #2 kwbMitel Technical User Oct 11, 2005 11,504 CA Asked the same question a couple of weeks ago. Slapin appears to be the only one. Bleeding edge stuff. ******************************************************* Occam's Razor - All things being equal, the simplest solution is the right one. Upvote 0 Downvote
Asked the same question a couple of weeks ago. Slapin appears to be the only one. Bleeding edge stuff. ******************************************************* Occam's Razor - All things being equal, the simplest solution is the right one.
Sep 26, 2008 #3 waterninja Programmer Sep 26, 2006 3 AU I have got my MX controller talking to a call manager but i am unsure on the version right at this point in time. it took about 10 minutes to setup Upvote 0 Downvote
I have got my MX controller talking to a call manager but i am unsure on the version right at this point in time. it took about 10 minutes to setup
Oct 9, 2008 #4 becca1jane MIS Jan 10, 2007 43 US Here's a doc from Cisco's site for using SIP between a 3300 7.1 and a Cisco UCM 6.1 which might be helpful: http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/pbx/interop/notes/678773.pdf Upvote 0 Downvote
Here's a doc from Cisco's site for using SIP between a 3300 7.1 and a Cisco UCM 6.1 which might be helpful: http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/pbx/interop/notes/678773.pdf