Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

sip trunks with SES

Status
Not open for further replies.

Orintas

IS-IT--Management
Apr 24, 2008
44
LT
Hello all,
I will to configure SIP trunk between CM 5.2 throught SES and external SIP service provider. SIP service provider require authorisation for SIP session. Where i can insert that user name and password on SES configuration?
 
The SES can only communicate to a SIP trunk that is a 'trusted host'. Which means no authorization. So either you or your service provider will need to provide a Session Border Controller (SBC) to authenticate back to their system and to also provide a trusted connection to the SES. Look for application notes on SIP service providers on Avaya.com for examples.

The only SBC's that I know to work with Avaya are the Acme Packet and the Cisco Cube. But if you can find one that can do NAT traversal then it should work.

Good luck.

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top