SIP Trunks - Sharing for co-resident resilient system.

[kwbMitel]

I have 2 vMCD's setup as resilient.

I have SIP trunking setup through an MBG proxy for the primary system.

Has anyone tried to setup sip trunking where they are shared between 2 systems?

My second system is failing to register.

**********************************************
What's most important is that you realise ... There is no spoon.

 

[danramirez]

you mean you have two MCDs sharing the same MBG?

do you want the sip trunks that are primarly registered on controller A to fail over to B in case A fails?

I'm not sure if that is possible but that makes me think of one thing:

-you will permanently need SIP Trunk licenses on both controllers

What hapends if you program B as a Secondary Destination Controller in Routing Rules of your MBG...?

I would think you need separate SIP trunks on A and B. Maybe the provider can group your DIDs among the two sets of trunks, I don't know you have made a good question by the way

Regards,

Daniel

http://www.hatkana.com

http://www.wtelecom.com

 

[LoopyLou]

Never acutally programmed SIP trunks to two controllers. Only setup resiliency so that on failure of controller 1 the SIP trunks connect to controller 2. Only ever did that once.

The beatings will continue until morale improves.