Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Sip trunking to Telco fail

Status
Not open for further replies.

oicu2

Technical User
Sep 11, 2003
10
US
Cant get this working-any help would be appreciated--
cs 1000 (opt61) rls 5.5, have a separate node built with CP-PM sig server for sip trunking to Telco--calls connect but only 1 way audio, Telco did a sniff and is seeing the ip address on the media card in the main node and is trying to send the rtp stream back to this ip (non routable private ip)--this causes 1 way audio-- I think they should be seeing the valid routable ip address of my sip node, not the main node ip addresses -- tried installing patch 22968 but
it fails to activate on the CP-PM sig server--
just about out of ideas
 
Looking at that patch, it seems you need to get that installed for the correct operation you are looking for.

Your problem right now is the patch not being installed. Get that resolved, and then continue to troubleshoot.


--
Fletch
Avaya E9-1-1 Product Manager
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top