Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SIP Trunk Without Registration and No Outbound Calls

Status
Not open for further replies.

Bubtek

Technical User
Nov 21, 2006
4
US
I have an NEC SV8100 and I'm trying to setup a SIP connection to an external SIP proxy. The connection is established as I can observe successful SIP OPTIONS and can make incoming calls from my SIP proxy to the NEC with no problems at all.
I can not make any outgoing calls. When I try to make an outgoing call I can see the the name of my SIP trunk appear on the endpoint display but I get no SIP messaging appear on the wire when using wireshark. It's as if the call can not leave the the NEC for some reason. Has anyone come across this issue before? Is there any sort of trace I can run to see what is happening on the NEC?

Also I could only find SIP trunking examples that use registration, the SIP proxy I'm using does not accept SIP trunk registrations, can anyone confirm that SIP trunking with out registration works? (If you have any examples that would be great)

Thanks
 
This is working now. I was missing a piece of config, in command 10-23 I needed to add the leading digits of the dialed number to 'Dial Number'. Once I added this I started to see outgoing SIP traffic.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top