Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Sip Trunk Twinning - No talk path 1

Status
Not open for further replies.

fedphone

IS-IT--Management
Apr 10, 2010
183
US
IPO R11 - Have ext twinning - call rings out to twinned cell - cannot hear the calling party on the cell - calling party can hear me - so im not getting talk path in both directions... Carrier says its not there issue

Anyone heard of this before?
 
Try enabling Keepalive messages on the SIP line.
1. Open IP Office Manager application and pull the current configuration from the IP Office.
2. Click on the System tab.
3. Click on the Lan tab used for passing SIP calls.
4. Click on the Voip tab.
5. Change the Scope of the Keep alives to RTP.
6. Change the Initial Keepalives to enable. Try a 30 second setting.

Depending on the URI configuration the ICR can be completely ignored.

If your URI is configured to use internal data then the IP Office will look into the user's SIP tab and if you have *'s it will look into ICR.

A madman with a taste for speed.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top