Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SIP Trunk TLS with MG100 / MG300 systems

Status
Not open for further replies.

edgarquadros

Technical User
Jun 30, 2011
22
BR
Hello guys!

Does anyone have success configuring the SIP Trunk with TLS and SRTP between MG100/300 and the SIP Provider?
I have a scenario here where the PBX and SIP Provider are failing in the handshake.
I tested it in another 3rd party PBX and it works. After the PBX received the certificate, I just needed to trust, that the SIP Trunk was registered correctly with the SIP Provider.
Also tested using an SIP Phone, and registered normally.

In the MG100/300 I don't know if we have a way to trust the certificate manually or config to trust automatically.

BR,
Edgar
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top