SIP Trunk Tenanting

[dryaquaman]

MXe 4.2

Is is possible to put SIP trunks in Tenants?
I have a system with multiple tenants that is now adding SIP trunks.
I can't find the form to mark the tenant group for it.

Dry Aquaman

http://www.university-music-on-hold.com

 

[LoopyLou]

Can't think of any form to do that. What are you trying to do? Will there only be one SIP provider?

I'd tell you a UDP joke but I'm afraid you won't get it. TCP jokes are the best because you always get them.

 

[Supernova99]

IP trunks are not tenantable resources
However you could restrict access to them via interconnect restrict or class of restriction for outgoing calls
Incoming calls using DDI will naturally provide separation

Share what you know - Learn what you don't

 

[dryaquaman]

In the old days (i.e. SX2000) I would use COR or Interconnect restriction or a combination of both to segregate 'tenants'. It became so much easier with tenanting. I was just hoping I missed something when I couldn't find how to tenantize SIP trunks.

Thanks.
Dry Aquaman

http://www.university-music-on-hold.com