Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SIP Trunk Question

Status
Not open for further replies.
rider92898

rider92898

Technical User
Aug 5, 2010
6
US
We have 4 Lync servers that are served by 4 SIP trunks off Call Manager. Here is the question that has been asked; if one of the Lync servers goes down, is there a way to automatically re-route the call coming into its SIP trunk to one of the other servers in order to prevent the caller from getting a busy or reorder signal?
 
Sort by date Sort by votes
What version are you running? On version 8 there are additional IPv4 addresses you can add in the SIP Trunk configuration that might accomplish what you are looking for. We have 2 exchange um servers so I have both of those IP's on the one trunk for this. 7.1 does not have this option, at least on the software version we have

Telecom Tech - East Tennessee
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Diya Freahat
  • Locked
  • Question
called name between avaya I P office & CUCM via SIP trunk
Replies
1
Views
188
Diya Freahat
Diya Freahat
Gnjiro
  • Locked
  • Question
Cisco Ip Phone 7841, 7821 Delay when making call both inbound and outbound in sip protocol
Replies
3
Views
298
thepfy
thepfy
Geordie12567
  • Locked
  • Question
Maximum concurrent calls on a SIP trunk with CUCM and Cube
Replies
2
Views
289
biglebowski
biglebowski
DTGMI
  • Locked
  • Question
Nortel to Cisco VG310 & 4431 SIP GWs
Replies
0
Views
89
DTGMI
DTGMI
Qzwsa
  • Locked
  • Question
Inband DTMF to SIP device for zone paging
Replies
1
Views
121
LoPath
LoPath

Part and Inventory Search

Sponsor

Back
Top