Sip trunk provider configuration in SBC

[Zero6]

Hi all,

I have received the sip information from the SIP provider and I want it to register through the sbc.
How can I configure this.
I have the user name and password and IP's and DNS from the provider
THe SBC is 7.2.2

Thank you in advance

 

[derfloh]

You can follow the guides for other providers and adjust them accordingly.

IP Office remote service
IP Office certificate check
CLI based call blocking
SCN fallback over PSTN

 

[Travis Harper]

SBCE is no joke.
call your partner reseller to help you.

 

[janni78]

Normally you would let the IP Office register the trunk through the SBC, unless there is some design reason not to.

"Trying is the first step to failure..." - Homer

 

[Zero6]

Hi All,

Yes janni78, that is what I want to let the sbc register to the provider and then let the pbx register the trunk to the sbc.
I did fill in the info but I am missing something.
I will check it and get some more info

 

[janni78]

The question is why you want to do this?

Trunks can't register on the SBC.
Either it passes through registration from PBX to provider, or you have a non registered trunk from PBX to SBC and the SBC adds registration towards the provider when needed.

"Trying is the first step to failure..." - Homer