Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SIP trunk programming

Status
Not open for further replies.

chinroc

Programmer
Apr 21, 2010
45
0
0
AU
Hi everyone!!! I am going to get one installation of 3300. Customer wants to use SIP trunks. Any suggestion for SIP trunk programming and thing I need to take care about SIP trunks? Thanks for help..
 
Make sure the SIP provider has been through the SIP interop testing.
There are SIP interop docs on MOL which will make it easy to set it up.

Share what you know - Learn what you don't
 
Find out the SIP provider. Check know base to see if there is a programming guide.If so you should be able to get it working by following guide. If you have a newish MBG you can use it for a SIP trunk proxy if needed.

The single biggest problem with communications is the illusion that it has taken place.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top