SIP Trunk Licensing 1

[DBrewsky]

IP Office Server Edition - Rls 10.0.0.1

I have an odd thing going on.. I have programmed a SIP Line, but when I try to dial across it, I get this error:

08:45:55 67659mS Sip: SIP Line (10): License, Valid 1, Available 0, Consumed 0
08:45:55 67659mS Sip: SIP Line (10): Outgoing Call in excess of License: Consumed: 0, Available: 0

My licensing shows the following:

Thoughts??

--DB

 

[critchey]

It sounded like the SIP sessions being set to 0 but I believe that was removed in R10. Just incase you can look for it here and if it is present make it higher then 0:

System->Telephony->Telephony

The truth is just an excuse for lack of imagination.

 

[DBrewsky]

I don't see any SIP Sessions in System->Telephony->Telephony. I even looked on a 9.1 system and don't see it there.

I have attached a copy of my config to take a look at..

--DB

 

[montyzummer]

on the remote server section on licensing its asking you about reserved sip trunk channels , try setting that to 5 and see what you get.

ACSS (UC/SBCE/SM/SME)

Not that they mean a thing anymore , get a brain dump pass the test crash the system.

 

[AACon]

Yeah the moved the sip channels for some damn reason to licensing, go edit it there and it'll work.

-Austin
I used to be an ACE. Now I'm just an Arse.

 

[DBrewsky]

Found it!

Remote System->License->Remote Server->SIP Trunk Sessions : It was set at 0... I bumped it up to 5 as suggested..


Thanks!! star for MontyZummer!!

--DB