SIP Trunk Channels

[JidhunV]

I have configured a SIP Trunk under the LINEoption and added 150 MSN numbers with their group ID under the [highlight #CC0000]SIP URI.[/highlight]. I am unable to add the 151st number, as the ADD button is disabled.
Please advise on how to add the MSN from 151-200.

I tried creating another SIP trunk with same credentials but the system is not reading from that option.,

 

[intrigrant]

Don't add MSN numbers in the SIP URI.
In the SIP URI enter a * in the Local URI field and add the MSN numbers in the Incoming Call Route list

 

[JidhunV]

Thanx buddy, It worked.!!

http://www.tek-tips.com/viewthread.cfm?qid=1720478

 

[JidhunV]

Thanx buddy, It worked.!!

 

[JidhunV]

I have one more issue.. when I did as instructed above, the outgoing CLI is the Extension no. ie if the no is (XXXXX123) it displays only 123 at the call receiver end.

Please advise

 

[intrigrant]

Each user has a SIP page were you can edit the to send data to the SIP line.

 

[JidhunV]

I cant find that option on the user page!!

im using the IPO 500 v2 R8.1 (65)
and manager software 10.1(65)

The menu tab options attached!!

 

[JidhunV]

Sorry my mistake...

I got it.

Thank you so much

 

[JidhunV]

Even though I found the option it didnt work.. as the external CLI was still showing the 3 digit extension number.

I sorted out the issue by adding the short code with 0N/Dial/Ns12345678"@xx.xx.xx.xx"/19

Thank you once again