SIP Trunk between BCM and UCx

[RLSbutton]

Hey guys, I have a SIP trunk running between my UCx and BCM50 6.0. When I dial out from the BCM that has 5 digit dialing to the UCx that has 5 digit dialing, (yes I want my lab to be like a large University setting, lol) I get anonmyous on the display of the UCx telephone.

I also dialed out from the BCM to my IP Office and same result. So there must be something I need to place into the OLI for each extension I am dialing out for? Any advice?

Joseph Sus Jr. Nortel Enthusiast

http://www.joetheucxguy.com

 

[ucxguy]

Try to set the Business Name field (under Telephony - Global Settings - Feature Settings). I vaguely remember that in some release(s) caller ID would not be sent over SIP trunks without the business name being set.

 

[RLSbutton]

Hey UCxguy,

It worked! Thank you, you are quite the Nortel expert

Joe

Joseph Sus Jr. Nortel Enthusiast

http://www.joetheucxguy.com