Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SIP to QSIG MWI at Branch CM Locations (Centralized MM)

Status
Not open for further replies.

avguytim

Technical User
Aug 7, 2011
19
US
I currently have a newly installed Modular Messaging with integration via Session Manager. System works great at core CM 5.2.1 location with SIP-Adjunct used as MWI Server. I am adding branch CM 5.2.1 locations via IP/QSIG trunking to utilize MM as centralized voicemail. All integration is working with the exception of MWI. OHV shows that MM is sending MWI request after new message is left. Documentation states that this will work with QSIG and is briefly mentioned in config notes for both SES and Session Manager under Considerations/Alternatives stating that

"A Modular Messaging system can
provide centralized voice message service when integrated via
SIP to an Avaya CM at release 5.2.1 or later. Other PBXs would
then be networked to this PBX using QSIG and utilize Avaya’s
SIP to QSIG interworking."

I have gone over the QSIG configuration multiple times but have had zero success. Has anyone been able to get this to work or can someone please direct me to documentation that pertains to "Avaya's SIP to QSIG internetworking". Any help would be greatly appreciated. Thanks!



 
Problem resolved... Extension range of branch CM not defined in dial pattern of Session Manager
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top