Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SIP Tie trunks betwwen two CS1000 1

Status
Not open for further replies.

JM2009

Systems Engineer
Jul 26, 2019
11
HK
Dear expert,

I tried to make a calll betwee two CS1000 through the SIP trunk but it did not go trough:

ACTIVE TN 008 0 08 00 IPMG 008 0

ORIG TN 008 0 08 00 IPMG 008 0 MARP CUST 0 DN 5001 L500
VGW TN 008 0 11 17
MEDIA ENDPOINT IP: 192.168.51.212 PORT: 5426
TERM VTN 240 0 00 19 IPTI RMBR 21 20 OUTGOING VOIP GW CALL
FAR-END SIP SIGNALLING IP: 0.0.0.0
FAR-END MEDIA ENDPOINT IP: 0.0.0.0 PORT: 0
FAR-END VendorID: Nortel CS1000 SIP GW release_5.0 version_sse-5.50.12*


ACTIVE TN 008 0 08 00 IPMG 008 0

ORIG TN 008 0 08 00 IPMG 008 0 MARP CUST 0 DN 5001 L500
TERM NONE
TTR 008 0 14 04
DIAL 200 0 10 TTR 0 40
RCVR 42 SET 10

DIAL DN NONE
MAIN_PM READY
TALKSLOT NONE
EES_DATA:
NONE
QUEU DIAL
CALL ID 0 6616

Please give me some hints to resolve this problem.

BR// JM
 
Assuming that the SIP link was working without any issues, then you might need to reboot your signalling server.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top