Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SIP TIE Route Members

Status
Not open for further replies.
Mar 29, 2012
4
US
We have a CS1000 running 5.5. We used to have 2 seperate SIP routes; however we no longer need the one so we have removed it, and we would like to reuse the licenses on the other route. So we are trying to rebuild the trunk memebers as part of the other route. All the other trunk members are built as IMM/IMM; however it won't let us built the new ones as IMM/IMM it gives error SCH3107: Only WNK start allowed with ESN signaling arrangement. Any thoughts? There must be a way to setup the members because there are already existing one's there.
 
Have you tried just returning through that prompt and see what happens?
 
I believe you need to change the SIGO on the route to STD, then change the trunks to IMM, then change the SIGO on the route back to ESN5.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top