I am trying to change the SIP registration port on R11.0.43 due to the SIP provider. I changed it on the transport tab to UDP 8933, Lan 2 5060, but it is still sending out on 5060 I believe...
REGISTER sip:sip-t.XXXX.com SIP/2.0
In this case, it lacks the proper port. Shouldn't it be:
REGISTER sip:sip-t.XXX.com:8933 SIP/2.0
They have another trunk built and running utilizing 5060, I am trying to get this one up for testing at the same time..the provider states I should be able to connect no problem...
Any ideas?
REGISTER sip:sip-t.XXXX.com SIP/2.0
In this case, it lacks the proper port. Shouldn't it be:
REGISTER sip:sip-t.XXX.com:8933 SIP/2.0
They have another trunk built and running utilizing 5060, I am trying to get this one up for testing at the same time..the provider states I should be able to connect no problem...
Any ideas?