SIP REGISTRAR CONFIG

[dclynch]

Does anyone know where you can change this in the 3300? We have a poly com that disconnects after 1 hour here is what I found in the PBx
Registrar Configuration
Allow Third Party Registrations: no
Default Expiry Duration: 3600 seconds
Minimum Configurable Expiry Duration: 300 seconds
Maximum Configurable Expiry Duration: 7200 seconds

The default Expiry is actually a counter when you start a call this counts down to zero then disconnects the poly com.

 

[LoopyLou]

That would be line side. Is it not in the SIP peer profile?

I'd tell you a UDP joke but I'm afraid you won't get it. TCP jokes are the best because you always get them.