WE recently moved from ISDN over to SIP in one of our sites and every couple of days i get SIP LINK Alarms, this is on a m3300 controller.
Is this something that i should be worried about? i had the network looked at by an engineer who couldn't find anything wrong. So i'm wondering if it is just the Controller being overly sensitive, and if it is the case is there a way to adjust that sensitivity. as you can see from the below it only appears to lose connectivity for a split second
Log Type Maintenance
Log Number 3670
Severity Warning
Date 2015/Jul/07
Time 10:06:11
Source SIP/SIPSm
Description The SIP link Site3SIP has failed with cause: ServerErrResp - response code 500 (Server Internal Error). The link will be retried in 6 seconds.
Module Main
File Name and Line Number Maintenance;0
Log Type Maintenance
Log Number 3671
Severity Info
Date 2015/Jul/07
Time 10:06:11
Source SIP/SIPSm
Description The SIP link Site3SIP has been restored.
Module Main
File Name and Line Number Maintenance;0
Is this something that i should be worried about? i had the network looked at by an engineer who couldn't find anything wrong. So i'm wondering if it is just the Controller being overly sensitive, and if it is the case is there a way to adjust that sensitivity. as you can see from the below it only appears to lose connectivity for a split second
Log Type Maintenance
Log Number 3670
Severity Warning
Date 2015/Jul/07
Time 10:06:11
Source SIP/SIPSm
Description The SIP link Site3SIP has failed with cause: ServerErrResp - response code 500 (Server Internal Error). The link will be retried in 6 seconds.
Module Main
File Name and Line Number Maintenance;0
Log Type Maintenance
Log Number 3671
Severity Info
Date 2015/Jul/07
Time 10:06:11
Source SIP/SIPSm
Description The SIP link Site3SIP has been restored.
Module Main
File Name and Line Number Maintenance;0