Hi guys,
I have a SLG in SS CPPM but the problem is the ELAN link is down, how enable the elan?
I try whit enl elan command but not works, the point is I have a cs1000e whit 2 nodes boot SIPGw, I want establish VTKRs with SIPLineGw a other PBX MITEL over SIP trunks.
Node ip 180.9.1.100
Ip SS 180.9.1.44
IP Mitel is 10.1.3.12
SLG Role: MO
SLG Mode: S1/S2
What IP put in this field MO SLG IP?? I have this 180.9.1.44
What IP Put in this field GR SLG IP?? I have this 10.1.3.12
ELAN #: 048 DES: SIP_Line
APPL_IP_ID: 0 .0 .0 .0 : 00000000 LYR7: DOWN DSBL
.stat dch 18
DCH 018 : OPER EST ACTV AUTO DES : SIPTRK2
[nortel@ssleader1002 admin]$ slgShow
=== VTRK ===
===== General ======
SLG State = VtrkReady
===== AML Info ======
hAppBlk TaskName Tid LinkState NumRetry LinkNum Trace
0xf733c0 SLG 0xfb00 WaitLinkNum 311 -1 0
===== Trace Info ======
No trace enabled
[nortel@ssleader1002 admin]$
Ideas???
Thanks
I have a SLG in SS CPPM but the problem is the ELAN link is down, how enable the elan?
I try whit enl elan command but not works, the point is I have a cs1000e whit 2 nodes boot SIPGw, I want establish VTKRs with SIPLineGw a other PBX MITEL over SIP trunks.
Node ip 180.9.1.100
Ip SS 180.9.1.44
IP Mitel is 10.1.3.12
SLG Role: MO
SLG Mode: S1/S2
What IP put in this field MO SLG IP?? I have this 180.9.1.44
What IP Put in this field GR SLG IP?? I have this 10.1.3.12
ELAN #: 048 DES: SIP_Line
APPL_IP_ID: 0 .0 .0 .0 : 00000000 LYR7: DOWN DSBL
.stat dch 18
DCH 018 : OPER EST ACTV AUTO DES : SIPTRK2
[nortel@ssleader1002 admin]$ slgShow
=== VTRK ===
===== General ======
SLG State = VtrkReady
===== AML Info ======
hAppBlk TaskName Tid LinkState NumRetry LinkNum Trace
0xf733c0 SLG 0xfb00 WaitLinkNum 311 -1 0
===== Trace Info ======
No trace enabled
[nortel@ssleader1002 admin]$
Ideas???
Thanks