Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SIP failover

Status
Not open for further replies.
telcodog

telcodog

Technical User
Jan 1, 2007
1,443
CA
Have a BCM450 R6 with SIP trunks and the customer wants the service provider to provide geographical failover if their SBC goes down. Problem is, the BCM can only accommodate one IP address in the SIP trunk setup.

I would have thought that the ISP could do everything on their side but apparently not, They want the PBX to direct outbound calls to the secondary SBC if the first one fails.

Anybody ever done that before?
 
Sort by date Sort by votes
All that I can suggest is that they have a fail back to regular PSTN circuits, whether they be digital ISDN or Analogue trunks and that would be assuming that they have licenses for it.

I also agree with you and I can't see how you could get the BCM to register to more than one Session Board Controller.


Firebird Scrambler
Nortel Meridian 1 / Succession and BCM / Norstar Programmer in the UK
Advance knowledge on BCM support
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

AShammah
  • Question
BCM50/FreePBX integration Sip or H.323
Replies
4
Views
132
AShammah
AShammah
MoJHK
  • Locked
  • Question
Emetrotel SIP trunk to IPO500V2
Replies
1
Views
122
curlycord
curlycord
2dfx
  • Locked
  • Question
SIP Trunks on Digital Sets? 4
Replies
18
Views
296
curlycord
curlycord
AShammah
  • Locked
  • Question
BCM50 Voip.ms sip trunk & call route setup 1
Replies
10
Views
203
AShammah
AShammah
Bhavin123
  • Locked
  • Question
BCM450 SIP to PRI gateway (ISDN30) 2
Replies
15
Views
302
snowman50
snowman50

Part and Inventory Search

Sponsor

Back
Top