A bit of a strange one for me, it's just me messing about in my lab, but basically I've got 3300 4.2 with analog and sip trunks which all work ok. I've created a Sip extn on the 3300 which is then configured on a Mitel 3000 (that is correct, a 3000! sometimes known as a Versatility or an Intertel Commander) as a sip trunk. I can dial from the 3000 to any internal extn on the 3300 and I can also dial out over the 3300's sip trunks from the 3000. But, if I try and dial out over an an analog trunk on the 3300 from the 3000 I get a second of ringing tone, then re-order tone. However, the 3300 still makes the call which when answered is silent and the 3300 still continues giving re-order tone to the Sip extn. I guess it may some kind of DSP issue / codec? I can make the 3000 g711 or g729. I've tried forcing both it it made no difference. It's no big issue as I'm only trying it out for possible future use.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Sip extn getting re-order tone.
- Thread starter tdmneil
- Start date
Similar threads
- Locked
- Question
- Locked
- Question