Hi,
Example below uses STMI4
STMI2 can also be used
SIP extensions will not work
unless you put in the following command:
CHANGE-ZAND:OPTLOAD;
You need to do the following so:
REG-SBCSU;
REG-ACSU;
REG anything else relevant like SDAT, ZIEL, PERSI, ACTDA and all parameters that are relevant to the Operator and HFA IP Extensions that you have added to the card.
If you can do an EXE-UPDAT BP and A1 then do a full REGEN so as you have a copy of all the system before changes are to be made.
Then delete everything off the card.
DEL-SBCSU:
DEL-ACSU:
and have the card empty.
Delete the card - easiest way is to REG the card then change the returned string from ADD to DEL
hit enter twice and the card should delete.
If the card does not delete then there is still 'stuff' on it and that has to be deleted first before you can remove the card.
The BFDAT Decides what the card can do.
So make a new BFDAT with the following in it:
ADD-BFDAT:18,SIP&HG3530,BCHL60&BCHL120,;
CHANGE-BFDAT:CONT,18,SIP,30,,1;
CHANGE-BFDAT:CONT,18,HG3530,120,,30;
CHANGE-BFDAT:OK,18,YES;
BFDAT 18 is used here, if 18 is already in your config then try and delete it (it will not affect any extensions/trunks)
DEL-BFDAT:18;
YES
If it does not delete then use 19 or 20 etc.
Just in the ADD-BCSU you have to specify the BFDAT also.
Then add the STMI4 with BFDAT 18 in it - Using 1-2-9 PEN as example
ADD-BCSU:IPGW,1,2,9,"Q2324-X500",1,"0",
18,,30,1,,,,0,IPV4,NO,NO;
Add the CGWB
ADD-CGWB:2,9,NORMAL,
IP ADDRESS OF THIS CARD,255.255.255.0,,,,,,,,,,,,,;
CHANGE-CGWB:CGW,2,9,GLOBIF,,,213,NO,0,
DEFAULT NETWORK GATEWAY OF THIS CARD,4060,"100MBFD",,,,,4061,0.0.0.0,0.0.0.0;
CHANGE-CGWB:CGW,2,9,SERVIF,"TRM",;
CHANGE-CGWB:CGW,2,9,ASC,29100,30099,"184","104",YES,YES,YES,YES,PRIO1,G711A,NO,"30";
CHANGE-CGWB:CGW,2,9,ASC,,,,,,,,,PRIO2,G729A,NO,"20";
CHANGE-CGWB:CGW,2,9,ASC,,,,,,,,,PRIO3,G723,NO,"30";
CHANGE-CGWB:CGW,2,9,ASC,,,,,,,,,PRIO4,NONE,NO,"20";
CHANGE-CGWB:CGW,2,9,ASC,,,,,,,,,PRIO5,NONE,NO,"20";
CHANGE-CGWB:CGW,2,9,ASC,,,,,,,,,PRIO6,NONE,NO,"20";
CHANGE-CGWB:CGW,2,9,ASC,,,,,,,,,PRIO7,G729AB,YES,"20";
CHANGE-CGWB:CGW,2,9,GKDATA,,1719,"PRIMARYRASMANAGERID",,,1719,"SECONDARYRASMANAGERID",,120;
CHANGE-CGWB:CGW,2,9,MGNTDATA,
IP ADDRESS OF ASSISTANT,8000,
IP ADDRESS OF ASSISTANT,443,CLASSIC;
CHANGE-CGWB:CGW,2,9,DMCDATA,0;
CHANGE-CGWB:CGW,2,9,WBMDATA,"HP4K-DEVEL",,ENGR;
CHANGE-CGWB:CGW,2,9,WBMDATA,"HP4K-SU",,SU;
CHANGE-CGWB:CGW,2,9,WBMDATA,"HP4K-ADMIN",,ADMIN;
CHANGE-CGWB:CGW,2,9,WBMDATA,"HP4K-READER",,READONLY;
CHANGE-CGWB:CGW,2,9,GWDATA,"PRIMARYRASMANAGERID",;
CHANGE-CGWB:CGW,2,9,H235DATA,NO,NO,"siemensGateway2003",,100,242-191-30-119-188-83-173-161-43-0-70-36-218-74-169-221-78-102-174-170;
CHANGE-CGWB:CGW,2,9,SIPTRERH,NO,,,;
CHANGE-CGWB:CGW,2,9,SIPTRSSA,NO,0.0.0.0,5060,5061,120,0.0.0.0,5060,5061;
CHANGE-CGWB:CGW,2,9,DLSDATA,,10444,NO;
CHANGE-CGWB:CGW,2,9,JB,40,120,20,4,60,200,2;
CHANGE-CGWB:CGW,2,9,MANLANIF,0.0.0.0,0.0.0.0,NO,0,0.0.0.0;
Reset the Card after adding the CGWB
RES-BSSU

EN,,2,9;
Add in the SIP and HFA Test Extensions
ADD-WABE:567&&568,,,STN,N;
ADD-SBCSU:568,FPP,SIP,1-2-9-0,S0PP,8,8,1,1,1,1,0,0,N,0,0,,,"SBDSS1",Y,Y,0,10,N,N,,,5,0,,,,,,,,,,;
ADD-SBCSU:567,OPTI,IP2,1-2-9-30,OPTIIP,1,14,1,8,1,8,1,0,0,N,0,30,0,1,N,2,18,N,,,Y,99,N,N,N,Y,N,,,,,,,,5,,,,N,NORMAL,Y,ENGLISH,0,TRIES,2,0,,,,,,,,,G711P,,;