SIP DID configuration for NEC SL1000

[padawan123]

Hi everyone,

Anyone manage to configure a SIP trunk ( 1 account registration with mainline number and sub-numbers(DIDs) )? Any help is very appreaciated. I'm new to this NEC SL1000 but after following some guides,hints I managed to make it initially work. Below is the setup that I need.

1. Caller ----- NECSL100 (with SIP trunk) ----- Main line ---- Ext 200 --- Working
2. Caller ----- NECSL100 (with SIP trunk) ----- DID#1 ---- Ext 201 --- not working
3. Caller ----- NECSL100 (with SIP trunk) ----- DID#2 ---- Ext 202 --- not working

I tried configure the DID translation table but still I'm unable to make the calls from DIDx numbers route to specific extensions. When calling DID it will call drop.

These are my settings:

http://files.engineering.com/getfil...c0f08bdc8e64&file=DDI_translation_table_1.png

http://files.engineering.com/getfil...c15c2276edbe&file=DDI_translation_table_2.png

http://files.engineering.com/getfil...80-b514-ede8e14c1001&file=DDI_Basic_Setup.png

Thank you in advance