Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SIP connection to SPA-112 (Cisco)

Status
Not open for further replies.
Zed071

Zed071

Technical User
Jul 14, 2008
16
CA
Hi folks

I have a couple of small sites where an Audiocodes box is overkill.

I'm wondering if I can get a Cisco SPA-112 to provide the line-side services for these sites. I've had the SPA working with both a 3CX and Asterix system, but connecting it to the CS1k (Rls 7.5) has got me stumped.

I have Avaya SIP licenses (and can get a B179 SIP set working), 3rd Party SIP and SIP access port licenses available.

Has anyone managed to make one of these things work with the 1K? Any hints to share without having to tandem through a second box?

Thanks

JW
 
Status
Not open for further replies.

Similar threads

JM2009
  • Question
SIP Tie trunks betwwen two CS1000
Replies
1
Views
96
Firebird Scrambler
Firebird Scrambler
HollTel
  • Question
TTY - PMS connection not working - Nortel CS1000 Rls 7.0 4
2
Replies
29
Views
2K
MossEng
MossEng
bltodd
  • Locked
  • Question
2050PC Avaya Nortel Softphone SIP-ALG
Replies
1
Views
127
phonebits
phonebits
bltodd
  • Locked
  • Question
ERR008 Digital and Analog Calls in Hang up after initial connection. Calls to outside hangup Fax too
Replies
0
Views
113
bltodd
bltodd
Trason
  • Question
e911 on rls 7 where to start
Replies
2
Views
310
bignose21
bignose21

Part and Inventory Search

Sponsor

Back
Top