Having trouble getting Sip working with a 406v2 and latest firmware 4.2-11. Any chance someone could do a walkthrough or send a working config, so that i could copy the sip line. i am prepared to change provider if this helps?
Yep, got me a licence, and i have added the sip settings you have suggested on another thread.i have also read the pdf you have linked to. Unfortunately I am testing through a remote session, dialing my home number through phone manager and watching call status and Monitor. Not skilled enough to suss out what monitor is telling me through the sip trace.....
Check you have an IP Route to your Default Gateway.
I would suggest 0.0.0.0 0.0.0.0 to xxx.xxx.xxx.xxx (xxx = your dg) then the LAN that the SIP works on.
You are transmitting requests but I see NO recieve messages and no confirmation that the SIP trunk is even registered.
Talk us through your SIP config!
ACA - IPOffice implement
ACA - IP Telephony
CCNA - Passed at last
Got it working. with the help of Nikos. I did not have my ip route set correctly. I am talking to 2 other ip offfice units on different sites connect over Wi-max, for internal extensions. I was sure i already had an iproute set up to talk with them. hmmmmm
As the man says, "i fixed it but don,t ask me how" I am in Gibraltar, and my motive is to enable cheaper calls to Spain and the UK over Sip. Can anyone reccomend a voip provider, cost and quality being imperative. Currently testing voipbuster.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.