SIP 9640 Handset Connecting to Exchange Server

[naz1972]

Hi guys,

I am having an issue whereby when I change the 46xx settings file and enter the relevant information for the exchange server, the 9640 SIP handset does not download the IP Address of the exchange server.

I have gone into the phone and chosen mute 27238 and selected view. It shows 0.0.0.0 for the Exchange Server. I have attached the 46xx portion of the file associated with Exchange settings in case anyone can see something glaringly obvious I have left out.

The phone states "Exchange Server Address is incorrect. Please talk to your administrator".

#################### EXCHANGE SETTINGS ###################
##
## Exchange Calendar Enabled
## Determines whether phone will retrieve calendar data
## from Microsoft Exchange
## 0 for Disabled
## 1 for Enabled
SET USE_EXCHANGE_CALENDAR 1
##
## Exchange Calendar Display
## Determines whether menu item(s) for Exchange® Calendar
## integration are displayed on the phone. This parameter
## is not supported on 16cc phones.
## 0 for No
## 1 for Yes
SET PROVIDE_EXCHANGE_CALENDAR 1
##
## Exchange Domain
## Specifies domain information for URL used to obtain
## Exchange contacts and calendar data. Appended to
## Exchange User ID specified in phone menus.(0 to 255
## ASCII characters). This parameter is not supported
## on 16cc phones.
SET EXCHANGE_USER_DOMAIN servermail.fray.local
##
## Exchange Server List
## A list of one or more Exchange servers to be accessed
## for contacts and calendar data. The default is null
## (""), but valid values are zero or more IP addresses
## in dotted-decimal or DNS format, separated by commas
## without intervening spaces, to a maximum of 255 ASCII
## characters. This parameter is not supported on 16cc
## phones.
SET EXCHANGE_SERVER_LIST 172.16.210.3
##
## For additional Exchange-related settings, see the
## CONTACTS SETTINGS section.
##
## Enable Exchange Reminder
## Enables popup reminder notifications to turn Exchange Reminder
## Message Box Interrupt screen on or off.
## If it is 0 = Off
## 1 = On
SET ENABLE_EXCHANGE_REMINDER 1
##
## Exchange Reminder Time
## To administer how far in advance the user wants to get the
## reminder for the appointment. Setting the value to 5 min for example,
## will cause the reminder/popup to appear 5 min before the start time
## of appointment. Setting the value to 0 minute will cause the reminder
## to be displayed at the start time of the appointment.
## The maximum reminder time can be set for 60 minutes.
SET EXCHANGE_REMINDER_TIME 5
##
## Exchange Snooze Time
## To administer how long in minutes for the Reminder to reappear
## after it has been snoozed (temporally dismissed) by the user.
## Setting the value to 5 min for example, will cause the Reminder
## popup to reappear after 5 min once it has been snoozed by the user.
## The maximum snooze time can be set for 60 minutes.
## SET EXCHANGE_SNOOZE_TIME 5
##
## Exchange Reminder Tone
## To enable/disable generation of reminder tone (error beep)
## that will be played when the Reminder popup appears. If the user
## chooses “Yes”, the reminder tone will be played with the popup.
## If user chooses “No”, the reminder tone will not be played with
## the popup. This is only played when a popup pops for the 1st time.
## 0 = Disabled
## 1 = Enabled
## SET EXCHANGE_REMINDER_TONE 0
##
## Exchange Notify Subscription Period
## To administer how long the phone re-syncs with the Exchange
## Server in seconds.
## 0 = Minumum value for the re-sync
## 3600 = Maximum value for the re-sync
## SET EXCHANGE_NOTIFY_SUBSCRIPTION_PERIOD 180


Regards
Naz