First of all, sorry for my English.
I'm going to explain what is my case.I have a NT Server 4.0 (192.168.73.145) & AS/400 (192.168.73.1), I work with Thin Clients (2200 of IBM) in LAN (192.168.73.0).
The problem is that we are going to install this Thin Clients in a remote places, and connect over FRAME RELAY with two router Cisco 2610 Ok? before I do the change, I'm configured a Cisco 801 in my LAN with an Primary IP (192.168.73.254) and an Secondary IP (192.168.75.254) so I can do all probes in my local network. Ufff.
Well, I configured the Route table of the NT & AS400 (route add 192.168.75.0 mask 255.255.255.0 192.168.75.254) and configure a thin client for connect in the network with an IP of 192.168.75.0). And Ok¡ works fine, but the communication with the NT is very slow. The response times are very big.
¿What can be the problem? The AS400 response inmediately but NT...
Thanks for all.
I'm going to explain what is my case.I have a NT Server 4.0 (192.168.73.145) & AS/400 (192.168.73.1), I work with Thin Clients (2200 of IBM) in LAN (192.168.73.0).
The problem is that we are going to install this Thin Clients in a remote places, and connect over FRAME RELAY with two router Cisco 2610 Ok? before I do the change, I'm configured a Cisco 801 in my LAN with an Primary IP (192.168.73.254) and an Secondary IP (192.168.75.254) so I can do all probes in my local network. Ufff.
Well, I configured the Route table of the NT & AS400 (route add 192.168.75.0 mask 255.255.255.0 192.168.75.254) and configure a thin client for connect in the network with an IP of 192.168.75.0). And Ok¡ works fine, but the communication with the NT is very slow. The response times are very big.
¿What can be the problem? The AS400 response inmediately but NT...
Thanks for all.