Single NODE/WildCard

[GTexx]

We have 4 CS 1000M's 1 CS 1000E all with different NODE ID's and NODE IP. Is there a way to use a single NODE ID & IP for all home office users and get them connected to the site where there IP TN/Profile is configured. Currently I am thinking each user will have to specify there site and user the appropriate site NODE ID & NODE IP. Is there some kind of wildcard feature that will accomplish this. the only thing I want to provide to all home office end user is a single NODE ID and NODE IP.

ex: all i2050 home users resources should look like:

1. Node: 1000
2. TN: 152-0-xx-xx
3. Node/Server: 172.xx.xx.xx

Trying to avoid having to say if your are from site A your NODE is 1234 & your server IP is xx.xx.xx.xx, then Site B.. then Site C.. etc

 

[bignose21]

TN's have to be entered in full into the i2050 config and tell the set exactly where to register so this has to be entered in full.

Node IP this has to be individual for each switch as they are on your company WAN and should not conflict, as they need to talk to each other. Unless you tell the i2050 the exact IP to register to it won't work.

The Nodes could all be the same if the VPNI's are different or you can use relaxed registration where you have say nodes 1000 to 1004 and you only enter Node 100 into the set.

The only other way which would cost you double the Licence is send them all to the same switch, then use NUID/NUTN to get them to go register in the right place (Not very practical).

 

[GTexx]

Thanks, sounds like alot for such a simple task. I will look at option with VPNI's.