Single line connection on Magix ETR card

[thephoneboy]

I have a customer with an exisitng Magix. He has a lot of partner telephone on the system (all that is OK) He has a ploycom connected to 016 ETR MODULE. Works. O.K. Problem is Confernce calls are hard to set up. Using a system phone on the system then joining in the comf. phone. I cannot find any documents that explain the S/L connection features if there any. Are there features that these ports can utilize? If not are there better feature functions on the 016 TIP/RING MODULE? Or is that just the best they can do. Any thoughts would be appreciated. And docs on the S/L features? Thanks

Sincerely, thephoneboy

 

[merlinman]

Give me a little more info on:

"Using a system phone on the system then joining in the comf. phone."

I kinda' know what you want to do, but I need to know how you are using it now.

 

[thephoneboy]

they are using a system phone. 6 button partner. They call the external parties then they call the conf. rm extension and confernce it in along with a out side numbers. They would like to be able to make the external conference calls form the conference phone it self. Hope this helps. Thanks

Sincerely, thephoneboy

 

[TouchToneTommy]

Dial the first number from the conference room speaker phone.

Press Flash

Dial the 2nd number

Press Flash again