telecomteen
MIS
Hi everyone,
I want to create a VoIP setup for a telecommuter. Equip is a CICS 6.1 CP100, T series sets. Call volume is not high to this site, but would like basic dialtone and access outside lines (POTS), etc. An analog ext. on the remote side is just fine. We are trying to go as cheap as possible, so no MCK extenders. Here's what I was thinking. PBX -> IATA -> FXO Gateway -> LAN -> WAN -> Remote LAN -> FXS Gateway -> analog phone. Has anyone set this up sucessfully? When off hook on the remote end, I need the FXS gateway on the CICS end to sieze dialtone. Any ideas, comments?
Thanks,
Matthew
I want to create a VoIP setup for a telecommuter. Equip is a CICS 6.1 CP100, T series sets. Call volume is not high to this site, but would like basic dialtone and access outside lines (POTS), etc. An analog ext. on the remote side is just fine. We are trying to go as cheap as possible, so no MCK extenders. Here's what I was thinking. PBX -> IATA -> FXO Gateway -> LAN -> WAN -> Remote LAN -> FXS Gateway -> analog phone. Has anyone set this up sucessfully? When off hook on the remote end, I need the FXS gateway on the CICS end to sieze dialtone. Any ideas, comments?
Thanks,
Matthew