Single entry for PRI Incoming Number

[Drew2400]

We have a PRI that presents 4 digits to the IPO. The extensions are a matching 4 digits in length. Would it be prudent and is it possible to use a single entry in Incoming Routes as opposed to individual ones?

If so, what is the syntax?

Drew

 

[amriddle01]

It's Incoming number xxxx destination # and that's it as long as you definately only recieve 4 digits.

ACS - IP Office Implement

 

[Drew2400]

I thought I read something about a period (.)

But, the above is the correct syntax?

 

[intrigrant]

ICR
LineID = your incoming lineID
DDI = 123456XXX
Destination = #

The XXX is copied to the destination

You can have individual numbers pointing to another destination like

DDI = 123456700
Destination = Group 200

The full number takes precedense ove the XXX number.

 

[victor5908]

The first choice for projecting outbound caller id is the users incoming call route and the Manager program will auto-config all of the routes for you so you may want to consider that option.
In Manager go to "Toolos-MSN Configuration

 

[Drew2400]

Thanks all. We'll give it a try...
Drew