installed system Platform on s8800 but it shows memory max really low on both domains. tried to install it through SP but it said meomry wasnt high enough. i tried doing ti manually but it wants root login whcih i did set the password during installation but it didnt like the onew i defined. how do isdjust the memoery or let telmpat adjust it for me??
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Singel Server install not showing enough memory
- Thread starter TDMorIP
- Start date
i was told by TAC that they really don't have any of these running anywhere yet due to problems with the images.
Ken Means
"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)
Ken Means
"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)
- Thread starter
- #3
got it working. apparantly both power supplies have to be up on initial install to power both banks of memory. setup only showed 6gig installed but when i add the other power supply it fires up those DIMM's. weird...anyhow if anyone is wondering the Single server setup was pretty easy to do following the avaya docs. only a couple samll misprints that i found but worked through it.
- Status
Similar threads
- Locked
- Question
- Locked
- Question