I have a Cisco 2600 configured for IP and Appletalk, Appletalk is bridged between the two ethernet interfaces and working fine.
The problem is getting IP to route across the the two interfaces eth0/0 eth0/1, there are two subnets 10.3.0.0/16 and 192.168.0.0/24.
I have set two static routes one for each subnet and a last gateway but still no joy....
There must be something obvious I have missed, can you help ???
The problem is getting IP to route across the the two interfaces eth0/0 eth0/1, there are two subnets 10.3.0.0/16 and 192.168.0.0/24.
I have set two static routes one for each subnet and a last gateway but still no joy....
There must be something obvious I have missed, can you help ???