hey all,
we had a sonicwall die on us and now i want to replace it with a pix 501, if the ip is in the range 192.168.14.xxx then the "office router" cisco ethernet router routes it to this "isdn" pix firewall which then sends it to an "isdn router" cisco 801 ISDN router
this all worked with the sonicwall instead of the pix 501
the isdn router makes an connection but i cant see anything on the other side IE tracert or FTP 192.168.14.xxx or ping
could someone tell what is wrong
this is the config file:
Building configuration...
: Saved
:
PIX Version 6.3(1)
interface ethernet0 auto
interface ethernet1 100full
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
hostname vbtest
domain-name d-gas.com
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol ils 389
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
names
access-list inside_access_in permit tcp any any
access-list inside_access_in permit ip any any
access-list inside_access_in permit udp any any
access-list inside_access_in permit icmp any any
access-list outside_access_in permit tcp any any
access-list outside_access_in permit ip any any
access-list outside_access_in permit udp any any
access-list outside_access_in permit icmp any any
pager lines 24
mtu outside 1500
mtu inside 1500
ip address outside 192.168.13.1 255.255.255.0
ip address inside 192.168.2.4 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
pdm logging informational 100
pdm history enable
arp timeout 14400
nat (inside) 0 0.0.0.0 0.0.0.0 0 0
access-group outside_access_in in interface outside
access-group inside_access_in in interface inside
route outside 0.0.0.0 0.0.0.0 192.168.13.2 1
timeout xlate 0:05:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
http server enable
http 192.168.2.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
telnet 192.168.2.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
terminal width 80
Cryptochecksum:efcdb98571b19de2c08cd576c1f67d7b
: end
[OK]
we had a sonicwall die on us and now i want to replace it with a pix 501, if the ip is in the range 192.168.14.xxx then the "office router" cisco ethernet router routes it to this "isdn" pix firewall which then sends it to an "isdn router" cisco 801 ISDN router
this all worked with the sonicwall instead of the pix 501
the isdn router makes an connection but i cant see anything on the other side IE tracert or FTP 192.168.14.xxx or ping
could someone tell what is wrong
this is the config file:
Building configuration...
: Saved
:
PIX Version 6.3(1)
interface ethernet0 auto
interface ethernet1 100full
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
hostname vbtest
domain-name d-gas.com
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol ils 389
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
names
access-list inside_access_in permit tcp any any
access-list inside_access_in permit ip any any
access-list inside_access_in permit udp any any
access-list inside_access_in permit icmp any any
access-list outside_access_in permit tcp any any
access-list outside_access_in permit ip any any
access-list outside_access_in permit udp any any
access-list outside_access_in permit icmp any any
pager lines 24
mtu outside 1500
mtu inside 1500
ip address outside 192.168.13.1 255.255.255.0
ip address inside 192.168.2.4 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
pdm logging informational 100
pdm history enable
arp timeout 14400
nat (inside) 0 0.0.0.0 0.0.0.0 0 0
access-group outside_access_in in interface outside
access-group inside_access_in in interface inside
route outside 0.0.0.0 0.0.0.0 192.168.13.2 1
timeout xlate 0:05:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
http server enable
http 192.168.2.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
telnet 192.168.2.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
terminal width 80
Cryptochecksum:efcdb98571b19de2c08cd576c1f67d7b
: end
[OK]